Hybrid Gas Density Monitor 879X – Hybrid Gas Density Monitor

Mechanical and electronic monitoring

Features

  • Exact switching following isochore at all temperatures
  • No contact bouncing
  • Independent, galvanically separated circuits
  • Output signal RS485 / MODBUS
  • Long term drift free output signal
Product request

Downloads

×
This is a mandatory field
Please enter your email address!
CAPTCHA image for SPAM prevention If you can't read the word, click here.

Technical Data

Applications

High voltage switchgear

Category

Hybrid gas density monitors

Dielectric strength

Microswitch: 2 kV terminal ground
Output signal sensor: 250V against mass (EN60255-5)

Measuring principle

Mechanical monitoring: Principle: Reference gas measurement
Electronic monitoring: Principle: Oscillating quartz measurement

Approval / conformity

GL, KRS

Vibration

At min. 5 kPa distance from switch point no contact bouncing
under 20...100 Hz: 4 g

Pressure connections

Open; Closed; G1/4" m

Media temperature

-40°C ... 80°C

Shock

50g/ 8 ms

Electrical connections

Cable PUR/Teflon/PE

Ambient temperature

-40°C ... 80°C

Type of protection


II 1G Ex ia IIC T3 ... T6
II 1D Ex ia IIIC IP6x T125°C ... T80°C
I M1 Ex ia I

Protection

IP65

Output signal

RS485 / MODBUS

Measuring range

Mechanical monitoring, measuring range absolute: 0...1.1 MPa (0...1100 kPa)
Electronic monitoring/sensor, measuring range absolute: 0...0.85MPa SF6 @ 20°C 0...56.1 kg SF6 /m3

Sensor

1.4435, 1.4404, 1.4571 (AISI316L, AISI316)

Hybrid Gas Density Monitor 879X - Hybrid Gas Density Monitor